There Are Four Reasons For The Failure Of a Industrial Micro PC

1. The Industrial Micro PC switch has actually not been run for a long time, as well as its inner contacts are oxidized, leading to extreme contact resistance;

2, the touch display screen button has solder joints desoldered or attached, the connector hangs and the call is poor;

3. Touching the within the display screen button or the switch board is filthy, there is a leak factor;

4. Mistake in the control program inside the touch display screen.

1. When the resolution of the Resistive Touch PC is transformed or replaced, calibration is needed. The screen dimensions of various brands as well as designs have apparent distinctions, representing different optimal resolutions. When the resolution is transformed, the displayed picture will certainly appear flat stretched or up and down extended, to make sure that the touch screen works with do not represent the program collaborates, and calibration is required currently.

2. Replace the computer mainframe and the loved one position of the touch screen as well as the display screen has actually not transformed. Nonetheless, after the computer host is changed, the coordinates corresponding to the corresponding program are difficult to make sure that they are consistent with the initial host. In this instance, the touch screen also requires to be calibrated.